Configuring Office Peers in FVE

Once you have successfully set up the local office FortiVoice system, you can configure office peers. Office peer trunks allow offices to call one another as if the call was made from a local extension.

Important: Make sure your FortiVoice unit and the peer office PBX are registered with each other’s IP address and SIP port number.

To set the office peer

1. Go to Trunks > Office Peers > Office Peers.
2. Select New.
3. Enter a name for the trunk and enable it.
4. Select the trunk type.
5. Enter the domain name or IP address of the remote office’s PBX.
6. Select the SIP profile for the trunk.
7. Select Create.

The post Configuring Office Peers in FVE appeared first on Fortinet Cookbook.