IMPORTANT NOTE: The device must be professionally installed.
The device can be mounted either outdoors or indoors and may be attached to either a pole or wall.
Note: The included PoE injector must be mounted indoors, as it is not weatherproof.
To mount the device on a wall
- Insert the mounting anchors into an appropriate wall.
- Screw the mounting screws into the anchors, ensuring that enough of the screw is exposed to allow for mounting the device.
- Hang the device onto the mounting screws, then slide the unit downwards to secure it into place.
Image may be NSFW.
Clik here to view.
To mount the FortiAP unit on a pole
- Loop the provided pole straps through the slots on the back of the device, then
around the pole. - Tighten the straps to ensure that the device is firmly in place.
Image may be NSFW.
Clik here to view.
The post FortiAP 112D Installation Guide appeared first on Fortinet Cookbook.
