FortiAP 320C Installation Guide

Using the provided hardware, the FortiAP unit can be attached to a ceiling or wall.

To attach the unit to a wall using the wall mounting hardware kit:

1. Insert the anchors provided in the wall mounting hardware kit into an appropriate location on a wall.
2. Insert the screws provided in the wall mounting hardware kit into the
   anchors.
3. Mount the FortiAP unit onto the screws.
4. Use the Kensington security slot to attach a cable lock (cable lock is not
   included) to protect your FortiAP device from unauthorized removal.
   You can now proceed with connecting your FortiAP unit.

To attach the unit to a ceiling using the T-rail mounting hardware kit:

1. Attach the T-rail connector to the bottom cover of the FortiAP unit using the four provided short screws.
   If extra space is required to accommodate drop ceiling tiles, use the taller T-rail connector.
2. Line up the connected T-rail connector with an appropriately sized rail and twist the unit onto the rail until it snaps into place.
3. Use the Kensington security slot to attach a cable lock (cable lock is not included) to protect your FortiAP device from unauthorized removal. You can now proceed with connecting your FortiAP unit.

The post FortiAP 320C Installation Guide appeared first on Fortinet Cookbook.