Create a route table for the internal network

This recipe is part of the process of deploying FortiGate for OCI. Note OCI is only supported by FortiOS 5.4.8. See below for the rest of the recipes in this process:

1. Create a virtual cloud network and public-facing subnets
2. Create a security list
3. Create a route table for the internal network
4. Create internal network subnet
5. Obtain the deployment image file and place it in your bucket
6. Import the image
7. Launch the FortiGate instance
8. Attach a storage to FortiGate (required)
9. Access the FortiGate
10. Create the second vNIC
11. Configure the second vNIC on the FortiGate
12. Change the protected network’s default route
13. [Connectivity test] Configure FortiGate firewall policies and virtual IPs

1. Now let’s change the default gateway for the protected network and point it to the FortiGate’s second network interface. Go to Route Tables > Create Route Table.
   
2. For all destinations, choose the Internet Gateway for now. You will change the configuration later. Click Create Route Table.
   
   A new route table has been created.
   

The post Create a route table for the internal network appeared first on Fortinet Cookbook.