Create the second vNIC

This recipe is part of the process of deploying FortiGate for OCI. Note OCI is only supported by FortiOS 5.4.8. See below for the rest of the recipes in this process:

1. Create a virtual cloud network and public-facing subnets
2. Create a security list
3. Create a route table for the internal network
4. Create internal network subnet
5. Obtain the deployment image file and place it in your bucket
6. Import the image
7. Launch the FortiGate instance
8. Attach a storage to FortiGate (required)
9. Access the FortiGate
10. Create the second vNIC
11. Configure the second vNIC on the FortiGate
12. Change the protected network’s default route
13. [Connectivity test] Configure FortiGate firewall policies and virtual IPs

1. In the FortiGate instance, click Attached VNICs > Create VNIC.
   
2. Create the virtual network interface by specifying the name, VNC, and internal subnet created earlier. Ensure Skip Source/Destination Check is selected.. Enter an IP address and click Create VNIC.
   
   You now have the second network interface attached to the FortiGate.
   
   
   

The post Create the second vNIC appeared first on Fortinet Cookbook.