IMPORTANT NOTE: The device must be professionally installed.
To mount the device on a wall
- Using the wall-mount bracket as a template, mark the location of the six mounting bolt holes on a flat wall surface.
- Drill the mounting holes in the marked locations.
- Fasten the wall-mount bracket securely to the back of the unit using the provided P10x16 mounting screws and washers. Use P6x35, P6x20, and washers to connect the device to the wall.
![]()
To mount the FortiAP unit on a pole
- Loop the provided pole strap through the slots in the pole-mount bracket then around the pole.
- Tighten the strap with the appropriate screw driver and ensure the device is firmly in place.
- Attach the device to the opposite side of the pole using with the provided P10x100 screws, locknuts, and washers. See the diagram.
![]()
The post FortiAP S322C Installation Guide appeared first on Fortinet Cookbook.